These don’t work for CNC communication. The more unknown brands may not. After the download was finished, we restarted the machine, plugged in the cable and gave it another go. Solution While the cable was unplugged, we installed the official drivers we found here. Contact Us Email Us.
||14 June 2016
||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
||Free* [*Free Regsitration Required]
Are available from many places on Ebay: Sorry, your blog cannot share posts by email. Click on the Windows key and the X key on your keyboard simultaneously to open the Quick Links menu.
The software we used was TeraTerm on a 64bit Windows uzb without installing custom drivers.
ATEN – USB-to-Serial Converter (35cm) UCA – Windows 10 (64bit) Drivers –
So if your USB to Serial converter worked in Windows 7 and doesn’t work in Windows 8, it is probably because you have an older or no-name brand converter that does not have the latest version of chip in it.
Troubleshooting We played around with the configuration parameters, hoping that it was an issue like having the need to add large transmit delay but sfrial did not change anything, the communication with the board was unstable. When these symptoms continuously occur on your computer and as a consequence Yc232a Control Software cannot be used properly, the driver of the Aten USB-serial converter should be updated.
Learn how your comment data is processed. Support Support center Downloads Developer section. Recommended for permanent installation to machines.
Download this item
Summary This article describes the procedure for downloading and installing version 3. In case Windows tells you that the driver is the same or older as the driver currently eindows use, you should uninstall the current driver first. Additional information There is no additional information available for this article.
This 8-port usb to serial converter works well. How to install the bit driver: You can use this driver as a replacement for your current driver should you experience problems using the Bridgemate Pro server on computers running Windows We played around with the configuration parameters, hoping that it was an issue like having the need to add large transmit delay but it did not change anything, the communication with the board was unstable.
Solution While the cable was unplugged, we installed the official drivers we found here.
This post is also available in: The driver will now be un-installed. This also applies when the version number is higher than 2.
If the Bridgemate Pro server uses a direct serial connection port or another brand of Wincows converter, do not use this driver. When re- connected, it will always assign the same Comm numbers to the same plugs – which is what you need for a permanent setup.
Yes I found this article helpful. In Windows 8 Device Manager the yellow warning symbol will show for converters that used to work in Windows 7 but are too old to work now: The data on the screen was consistent and the ghost was banished.
These new converters can be recognised by the third character of the serial number, which is printed on the label on the back of the converter. Can be purchased on Ebay, Amazon, etc. This article describes the procedure for downloading and installing version 2.
Aten UCA USB to 1 Port RS Serial Converter w 35cm Cable –
These models that are windpws by many sellers on Ebay. If the character is a digit, the converter is the old type and this converter cannot be used with bit versions of Windows When this version number is not equal to 2. Corporate Company Jobs Contact us. And new drivers wont help it.
While the cable was unplugged, we installed the official drivers we found here. Bridge Systems is not responsible for any action you take when uninstalling these driver files. The system was working as expected.